Consumables, Tools, Miscellaneous (as of 9/29/09)—Expenses $ 4,116.98: Amt paid: $ 4,484.11; Amt Due:($ 368.95)

• 9/29/10: nut plates; rivets for nut plates; bolts: $19.69
• 8/26/10: 3 cans gray primer (Walmart vs Ace Hardware): $12.83
• 8/14/10: 3 cans gray primer $14.56
• 7/16/10: Sharpie fine line pens $20.42
• 6/17/10: 2 cans spray primer: $14.56
• 5/10/10: Aluminum for seaplane doors, inner corner wraps, extended baggage, etc: $285.20
• 4/24/10: Spray primer 3 cans $14.49
• 3/28/10: Fairleads, torque seal: $ 6.51
• 3/27/10: 3 cans gray primer: $14.56
• 3/21/10: 22 Heyco SB500-6 Snap Bushings: $ 10.00
• 2/16/10: 750 #4-5 rivets: $ 38.68
• 1/30/10: Pitot tube tubing; screws, bolts, washers, grommets: $74.53
• 1/18/10: Gorilla glue for rivnuts: $8.10
• 1/7/10: 3 plastic organizer containers for rivets, nuts, etc: $12.52
• 1/6/10: Nut plates, rivets, wire for wing, connectors, etc: $137.36
• 1/05/10: 1"x1"x0.125" 6061 T6 angle: $16.00
• 12/29/09: 2 cans of spray primer: $9.71
• 12/21/09: 1,000 #4-3 & 1,000 #4-4 rivets: $73.08
• 11/20/09: Molex connectors for wingtip lights: $47.16
• 11/4/09: MEK (gallon), Acid (proseal) brushes: $29.68
• 10/30/09: plastic container for misc drills; dremel cutting wheels; dremel sanding sleeves: $17.46
• 10/28/09: Reduced shank drill 17/32 for strut; 9/16 reamer; 11/32 drill: $52.20
• 10/23/09: 12 #30 drills, 6 #21 drills, 6 #11 drills: $50.24
• 9/29/09: rubber gloves for prosealing: $13.48
• 9/25/09: Cable ties & 8-32 screws: $15.45
• 9/24/09: shrink tube & zip-tie stick-on mount base package: $12.84
• 9/24/09: 25 feet, 22 gauge wire for elevator servo: $5.00
• 9/23/09: 1,000 tank rivets #4-2: $61.55
• 9/18/09: Misc screws, rivets, tank plugs, add'l cleco pliers, bolts, nuts: $54.72
• 9/15/09: Rivets for tank sealing: $206.10
• 9/12/09: Add'l Proseal for L wing: $ 152.80
• 9/12/09: gloves, shop towels, acid brushes (for prosealing) $46.22
• 9/5/09: Air rivet gun (broke one; need another to keep moving) $41.83
• 9/2/09: 5 cans gray & black primer: $24.20
• 8/17/09: 3 cans gray primer: $14.56
• 8/14/09: Screws (gas caps) & AN305A bolts for elevator: $4.92
• 8/5/09: 300 3/32 clecos & 200 1/8 clecos: $196.26
• 7/21/09: 4 roloc sanding discs for use on leading edge ribs: $4.90
• 7/16/09: 6061 T6 tubing for use w/ pitot tube: $10.00
• 6/30/09: Misc parts (rivets, nut plates, zip ties, RTV) from Ken Aero: $79.22
• 6/9/09: PVC & connectors for wing wiring: $11.40
• 6/5/09: Gray primer spray cans (2 of them): $9.61
• 06/02/09: Diamond grip (box) of gloves (like hospital gloves) for proseal work: $15.05
• 05/27/09: shop rags & gallon alcohol: $37.93
• 05/20/09: 3/4" step drill, 10 add'l #30 drills, 36" sanding belts (8), 1/2" ball-nose bur, #21 & #11 treaded drill (2 ea); ruler: $140.18
• 05/01/09: Proseal (1 pt Type B & 2 qts Type A: $228.13
• 12/25/08: 50 each med (red) & fine (blue) 2" Type R (roloc) discs: $67.00
• 12/5/08: 3M 7447 Maroon Scotch-Brite hand pads: $30.41

Note: I decided to start putting new expenses at the top so you don't have to scroll down

• 5/29/08: Green Etch Primer spray can: $15.61
• 5/29/08: Epoxy Primer--Gray (for inside surfaces): $42.97
• 5/29/08: Epoxy Hardener: $15.07
• 5/29/08: Reusable Spray unit & cartridges: $14.52
• 6/2/08: K1000-08 nut plates (straight--two lug): $97.60
• 6/2/08: K3000-08 nut plates (corner--two lug): $5.31
• 6/2/08: K2000-08: 1 lug anchor nuts: $5.76
• 6/2/08: #3-2 Cherry Rivets for nut plates: $23.40
• 6/2/08 Mixing sticks for pro-seal: $10.21
• 6/2/08: Tempo self-etch primer: $25.00
• 7/17/08: Cleco pliers (used from Yard Store) $2.95
• 7/17/08: Pneumatic cleco install tool: $74.95
• 7/17/08: #30 cobalt jobber drills: $14.25
• 7/17/08: 6" circle cutter: $18.95
• 7/17/08: 2" fine roloc polishing discs: $16.00
• 7/17/08: 2" medium roloc polishing discs: $16.00
• 7/17/08: Sealant mixer: $16.95
• 7/17/08: Pneumatic sealant gun: $99.95
• 7/17/08: 0.40" sealant cutter: $5.50
• 7/17/08: Phenolic scraper for sealant: $17.95
• 7/17/08: 1/8" clecos (qty 500): $125.00
• 7/17/08: 5/32" clecos (qty 100): $25.00
• 7/17/08: 3/16" clecos (qty 100): $25.00
• 7/22/08: Sharpie marking pens: $15.06
• 7/24/08: Nutplates, #8-32 screws, green primer: $85.01
• 8/7/08: 4' x 8' sheet of 6061 T6 0.063": $96.00
• 8/8/08: Drum sander abrasive sleeve refills & abrasive flap sanding discs: $20.00
• 8/19/08: 4-#11, 4-#21, 10-#40, 1-1/4" hand reamer, 1-3/16" hand reamer, 1 debur scraper, 10 debur blades: $121.48
• 8/25/08: Epoxy primer, hardener (cans for bulk spraying); Self-etching primer spray cans: $92.29
• 9/2/08: Add'l solid rivets for wing spars; air fitting for spray gun to prime spars: $12.15
• 9/3/08: Rustoleum spray primer (try it to see if we can save money on primer!): $5.37
• 9/3/08: Alcohol to clean parts (split it w/ you): $8.26
• 9/3/08: Six 5" C clamps to clamp main spars to work table to align ribs: $31.32
• 9/3/08: Add'l marking pens; shop towels: $8.93
• 9/3/08: 2 cans self-etching primer (in case above Rusoleum doesn't work): $34.34
• 9/10/08: Aileron (wing) torque tube bearing assembly: $225
• 9/10/08: Rudder servo: $150
• 10/28/08: Primer, Nut plates, keyed rivnuts, grommet for rudder electrical: $34.80